•Sieb, Deckel
•Öl- Wasserabscheider MMS 32
•Handrad-Strahlmittel-Dosierventil SANDSTURM-32
•Fernsteuerung REMCON® mit Zuluft- und Ablassventilen, Schalldämpfer, Totmannschalter RAV I und TWIN LINE-Doppelschlauch 20 m lang
•Schnellkupplungen CQT-1
•Nylon-Düsenhalter NHP-1, DN25
•Betriebsanleitung
It is used both at industrial facilities with a significant amount of work, and at small industries or construction sites for cleaning of metal, concrete, wood and other surfaces from corrosion products, scale, graffiti, old paint, lubricants, and other contaminants, leaving ideal surface for the application of protective anticorrosion coating.
FEATURES
Blast machine Blastcor® BM-100 RC has a small size and easy to transport in a small truck or car trailer.
ABRASIVE MEDIA
Supplied with Sandsturm® multipurpose abrasive metering valves, which allow working with any common abrasives 0.1 to 4 mm grade: cast-iron and steel shot and grit, marble and granite chips, glass beads, aluminum oxide, silicon carbide, alundum, copper and nickel slag and other kinds of media fabricated specially for blasting.
Its work is performed by means of introduction of abrasive material through the abrasive metering valve SANDSTURM®-P and compressed air through the air line into a pusher line assembly.
After mixing in the adjusted proportion abrasive-air mixture is supplied to the abrasive blasting hose at high pressure and is directed on to the surface that is being treated, passing through the abrasive blast nozzle and speeding up.
Silencer reduces level of discharge air noise during machine depressurizing and traps abrasive particles for safe operation.
They are equipped with high-efficiency air filter moisture separator MMS-32 for preventing of ingress of moisture, oil and other contaminants into the blast machine.
The sieve is located inside that reduces the overall height of the blast machine and makes it easier to load it with abrasive. A thick perforated metal sheet with openings of 4 mm is used as a sieve. A perforated sieve is more effective for screening abrasive material than a sieve made of wire mesh. It protects the blast machine from particles more than 4 mm diameter and different types of debris that prevent uninterrupted operation of the equipment. To protect the device, they use a lightweight metal edge-raised cover, the edges of which hang over the walls of the setting and prevents the passage of moisture into the machine.
Couplings CLAMP allow you to take off the valve and discharge the abrasive from the blast machine in 5 seconds, remove the foreign object, which prevents the normal uninterrupted work, or replace the valve for its repair.
Bigger diameter inspection hatches for easy access to internal components.
•Alle Druckstrahlgebläse Blastcor - BM sind auf Entsprechung den Technischen Vorschriften der Zollunion (Russische Föderation, Weißrußland, Kazahstan) zertifiziert. Deklaration-Nr. RU D-RU.АВ45.В.36364
•CE geprüft
