•Injektor-Strahlpistole Typ SGI mit Borcarbid-Strahldüse
•Strahlschauch ∅19 mm
•Druckluftschlauch, Polyurethan ∅ 12 mm
It is used for removing burrs, scale, rust and old paint, roughness smoothing, polishing, and for working of non-metallic surfaces. A distinctive feature of this chamber is small consumption of compressed air. Stable work without pulsation is achieved in the presence of compressed air in a volume of 0,8 m3/min at a pressure of 5-8 bar
Blastcor® BC-110 cabinet has enlarged doors and a large work area that allows the operator to work not only small but also large-sized products. On request, the chamber can be manufactured both with front and side loading of products.
Supplied with Sandsturm® multipurpose abrasive metering valves, which allow working with any common abrasives 0.1 to 1.2 mm grade: cast-iron and steel shot and grit, glass beads, silicon carbide, alundum, copper and nickel slag and other kinds of media fabricated specially for blasting.
MANUFACTURING OF BLAST CABINETS BY ORDER
The operator places the workpieces on the rack and directs the abrasive-air jet onto the surface, holding the blasting gun “SGi” through special openings in the chamber with his hands.
Thanks to the construction of the jet pistol, vacuum is created under the air nozzle, and abrasive material is collected through the abrasive hose by the lower pipe of the collecting hopper of the chamber and is fed into the blast nozzle of the gun.
Chamber BС-110 is supplied with SGi Injection gun
•alle Strahlkabinen Blastcor® - BC sind auf Entsprechung den Technischen Vorschriften der Zollunion (Russische Föderation, Weißrußland, Kazahstan) zertifiziert. Deklaration-Nr. RU D-RU.АВ45.В.37207